Thin Mini Gps Tracker Low Cost Real Time Positioning For Motorcycle
Car Vehicle
C003-01-4G is a wired multifunctional 4G vehicle-mounted
positioning and tracking device. Its rich interface can connect a
variety of different sensors . The product is suitable for
monitoring and data collection of various vehicles.
Thin Mini Gps Tracker Low Cost Real Time Positioning For Motorcycle
Car Vehicle
Specification
| Dimension | 90(L) x 45(W) x 13.5(H) mm |
| Weight | 50g |
| Operation Temperature | -20℃ - 70℃ |
| Operation Voltage | 9-90vDC |
| Humidity | 20% - 80% |
| GSM Frequencies | 850/900/1800/1900 MHz |
| GPRS | Class 12 |
| GPS Sensitivity | -159dBm |
| Acquisition Sensitivity | -144dBm |
| Position Accuracy | 10m |
| TTFF (Open Sky) | Cold Start: <38s
Warm Start: <32s
Hot Start: <2s |
| GSM/GPS Antenna | Built-in design |
| Data Transmit | TCP, SMS |
| Mileage Report | Track by time/distance interval |
Thin Mini Gps Tracker Low Cost Real Time Positioning For Motorcycle
Car Vehicle
Remarks
1.GPSGSM antennas are built-in design,it can be artistic but
unaffected.
2.Power onnector,it works as a line to connect the engine and the
tracker,offering orginal supply to tracker.
3.GPS mode is adapted to u-blox chip, its position accuracy reaches
to 5m.
4.GSM mode is adapted to MTK MT6260 chip,has dual core, can
transmit data by TCP and SMS.
5.DC-DC circuit can convert the voltage 9~90V of engine to 5V for
tracker to work normally.
6.GSM chip can support SIM card of worldwide bands of
850/900/1800/1900MHZ.
Real Time Tracking
More precise positioning,wider coerage,
More accurate location
Cut and resume oil remotely
Cut off vehichle power or fule with relay
so as to stop vehicle in case of theft
History Route
User can playback vehicle past location details
Geo-fence
when vehicle move in or out preset geo-fence,there is instant
alarm.
Thin Mini Gps Tracker Low Cost Real Time Positioning For Motorcycle
Car Vehicle
Component selection:
Properly selected components determine the reliability level and
the production cost of a device. We choose components by optimising
the customer's expectations.
Electrical diagram design:
Diagram design is a fundamental stage of equipment design. In many
cases, the process is iterative and requires modifications.
PCB design:
The next stage is laying out the components on the printed circuit
board. Designing a multilayer PCB that meets the functional
requirements and guarantees stable
operation of the device requires considerable expertise and
experience in the area of electromagnetic compatibility.
Equipment start-up:
It is the fun part of the hardware design process. At this stage,
the results of many hours of work can be finally put to test.
We take customers' satisfaction as the life of our company, which
earn us many orders from new and old clients, who know our business
style.
we hope we can have the pleasure to provide our service to you, if
you are looking for a reliable supplier.
Contactor Details:
whatsapp: +86-13717161241
mobilephone: +86-13717161241
Wechat:+86-13717161241
website:www.gpstrackerlocator.com
