Ethiopia Standard Car Truck Speed Limiter Town Speed Limit 30kM/H
Safty Driving with Printer
1 Speed Limiter GPS Product Specifications
Vehicle speed limiter CA100F is an intelligent terminal equipment
which can realize precise speed limiting for vehicles. It is not
only a speed limiter but also a GPS Tracker.Speed control precision
is very high and the performance is reliable. It will not affect
the big throttle start nor the power torque, stable and reliable.
It only limits the maximum speed and the vehicle will not stall
during speed limiting, and ensure the throttle pedal free movement
in the right speed range.
| Dim. | 117*92*31 (mm) |
| Band | 850/900/1800/1900MHz |
| GPS chip | U-blox |
| Bluetooth Module | BT360I |
| Work Voltage | DC 9V－36V |
| Battery | Rechargeable 3.7V |
| Standby work current | < 40mA |
| Operation Temp. | -20°C to +70°C |
| Humidity | 5%--95% non-condensing |
| CPU | STM32F105RBT6 |
2. Speed Limiter GPS Attention
Ethiopia Standard Car Truck Speed Limiter Town Speed Limit 30kM/H
Safty Driving with Printer
- Positioning and Tracking: Through the on-line Positioning Platform
or the cell phone to locates at times, and get the working status.
You can choose the Positioning Platform by yourself;
- Triggering Emergency Alarm: When there is a emergency happened on
the vehicle, you can put on the button and the installed device
will send out alarm to the authorized numbers.
- Remote controlling oil and circuit: you can control the oil and
circuit via the device by SMS in anywhere and anytime;
- Remote Monitoring: In anywhere and anytime, call the phone number
in the device, when it connects, you can monitor the sound around 5
meter.
- Movement Alert: Send SMS to the device to start the movement alert
function. When the vehicle is moving, the device will send the
movement alert to all authorized numbers.
- Overspeed Alert: Send SMS to the device to start the movement alert
function. When the vehicle is overspeed, the device will send the
overspeed alert to all authorized numbers.
3.Speed Limiter Analysis of the content of tcp reply:
Ethiopia Standard Car Truck Speed Limiter Town Speed Limit 30kM/H
Safty Driving with Printer
| 1 | FACTORY*123456 | Setting back to factory default |
| 2 | CHANGEPW*123456*138138 | New Password:138138 |
| 3 | SPEED*123456*080 | Set Speed OK: 80 |
| 4 | RESET*123456 | Cancel all alarm setting and re-power on |
| 5 | INTERVAL*123456*030 | Set Interval 30 s OK |
| 6 | IP*123456*S121.201.110.106,5300 | IP SET OK |
| 7 | NUMBER*123456*13612345678 | NEW ID: 13612345678 |
| 8 | TIMEZONE*123456*+08 | TIMEZONE: +08 |
| 9 | UPGRADE *123456*39.108.130.237,2332 | Upgrade Main Starting!!! |
| 10 | ACCON*123456*30 | Set Acc On Interval 30s OK |
| 11 | ACCOFF*123456*60 | Set Acc Off Interval 60s OK |
| 12 | TCP | Device Info |
| 13 | PULSE*123456*450 | Set PULSE parameter 450 OK |
| 14 | BTprint*123456 | Bluetooth printer start to print |
| 15 | print*123456*010 | change the Bluetooth print time is 10 minutes |
| 16 | Supplyoil*123456 | Supply fuel remotely |
| 17 | Cutoil*123456 | Cut off the fuel remotely |
| 18 | ALARMPHONE*123456 | Send alarm to admin phone number |
| 19 | openpulse*123456 | Open limp mode |
| 20 | Tcp | TP121.201.110.106
P7000DD000019171223244F0000S0014R0000O
N30OFF60VJun 12 2020A:CMNET,p450,s80,c15,
0.360V, 0.720V,12.43V,a0,G00,-59 dbm |
(TP121.201.110.106P7000DD000019171223244F0000S0014R0000ON30OFF60VJ
un 12 2020A:CMNET,p450,s80,c15, 0.360V, 0.720V,12.43V,a0,G00,-59
dbm)
TP121.201.110.106 P7000: IP and port
DD000019171223244: device ID number
F0000S0014: upload data fail 0 times, successful 14 times
R0000: memory data is 0
ON30OFF60: interval of acc on is 30 seconds, and acc off is 60
seconds
VJun 12 2020: firmware of the devices is JUN 12 2020
A:CMNET: the APN is CMNET
p450: Pulse coefficient is 450 (If the pulse coefficient is larger,
the speed will be
smaller)
s80: speed limiter max =80km/h
c15: For mechanical throttle, the time to disconnect the fuel line
is 15 seconds
0.360V, 0.720V: Two throttle voltage values for electronic throttle
vehicles
12.43V: vehicle voltage values
a0: a0 is acc off, a1 is acc on
G00: G00 means GPS not fixed, G10 means 10 satellites found
-59 dbm: GSM signal
4.Speed Limiter FAQ
- How to connect the relay?
Answer:Relay have 4 lines:87A and 30PIN are respectively connected to the
two ends of the cut oil pump line;86 connects 12V or 24V power line
in series;85PIN connects to the white line of the GPS speed
limiter.Note: Control the speed of the speed limiter with above
way, the delay of the speed limit will be relatively large. For
example, if the speed limit is set to 40km/h, the car can also run
up to 50km/h during acceleration. So, find the car pulse speed line
and calibrate the pulse speed, the delay will be much smaller.For
vehicles with mechanical throttle, if want to limit the speed
without delay, need connect a solenoid valve and use a relay to
control the solenoid valve to achieve the purpose of real-time
speed limit.
- Does the speed limiter have the managment fleet platform?
Answer: Yes.the paltform is www.gps-go.com
- Does the speed limiter send the data when the power is cutting
down?
Answer:The speed limiter will alarm when the power is cutting down and
upload the data to the paltform.
5. Speed Limiter maintenance and troubleshooting instructions:
- The red light is the power indicator. If it is steady, it indicates
that the main power is on, and the off indicates that the main
power is off, if the red light is not on, please check the power
connection is normal or not
- Blue is the GPS indicator, always on indicates GPS positioning, and
off means that GPS is not positioned, if GPS can't fix the
position, please check the GPS antenna is connected normal or not.
- Green is the system indicator. If it is steady, it indicates that
the GSM network is not registered. please check the SIM card is
normal or not, and GSM antenna is normal or not?
