Ethiopian Standard Speed limiter With Bluetooth Printer Speed
Governor ES6413:2019
1. Product Brief:
The vehicle speed limiter CA100F is a vehicle terminal device can
make accurate and intelligent vehicle speed Limiting. It can judge
the vehicle speed by vehicle pulse speed data and GPS speed data
precisely, and control the vehicle speed by intervening the
throttle valve opening size.The user can set the speed limit value
through the external digital display controller .
The product adopts intelligent STC chip, with high control
precision, stable and reliable, will not affect the starting
throttle, not affect the dynamic torque, only limit the maximum
speed of the vehicle, control the throttle valve but will not lead
to stalling, can ensure the throttle pedal can move freely in the
allowable speed zone. It is a powerful and efficient intelligent
vehicle safety products.
2. Product Function:
- Fixed maximum speed limiting: Set a maximum speed according to the
actual needs of vehicles. For example: if you require the vehicle
speed does not exceed 60Km/h (or other appointed speed), the
product will strictly control the vehicle speed does not exceed 60
Km/h (or other appointed speed) ;
- GPS speed data collection data collection ;
- Vehicle pulse speed ;
- Digital display controller adjustment.
Ethiopian Standard Speed limiter With Bluetooth Printer Speed
Governor ES6413:2019
3. Technical Parameters:
Ethiopian Standard Speed Governor ES6413:2019 With Bluetooth
Printer GPS Speed Limiter
| Item | Parameters |
| Overall Size | 20.0 X 9.2 X 4.5 CM |
| Host Net Weight | 0.4 KG |
| Processing chip | STC |
| Speed Limiting Zone | 20-200 Km/H |
| Speed Limiting Deviation | ±5Km/H |
| Mechanical Bearing Capacity | 400N |
| Working Voltage | 9-36 V |
| Rated Power Consumption | <0.3 W |
| Working Current | <60 mA |
4 The Mechanical Actuator
For the Electronic throttle ( EFI ) vehicles , no need add
mechanical actuator, the limiter will simulate the voltage value of
the vehicle throttle sensor, when the vehicle is over speed, The
limiter will give ECU a idle voltage value, ECU will control the
throttle according to this voltage value. When the vehicle is in
normal driving state(not over speed), the speed limiter will not
interfere the vehicle speed. The throttle sensor will give ECU
normal driving voltage, let the vehicle keeping normal driving.
5 The Electronic throttle ( EFI ) Vehicle Speed Limiter
Installation Steps
Specific Installation Steps:
(Take the truck speed limiter installation as an example)
① Take apart the protective shell which is beneath vehicle steering
wheel, open the dashboard with tools, the speed limiter will be
placed in this steering room.
② Find the vehicle accelerator pedal wires harness at first ,then
find the two signal wires from the wires with multimeter test.
There are six wires in the accelerator pedal interface , two power
wires ,two ground wires, and two signal wires. Start the vehicle,
step on the accelerator pedal, let the vehicle in idle state, then
the signal wire voltage value will change, thus you can find the
signal wires.
After find the signal wires, please record the voltage value and
make marks on the two wires , It will be convenient with the next
step.
(Generally, the voltage value of the accelerator pedal signal wires
is about 2 times of the other wire, and the low voltage is about
0.4V, and the high voltage is about 0.7V.)
③ Next, we set the voltage value of the brown wire and the white
wire of the speed limiter to the value what we test from the
vehicle accelerator pedal signal wire.
How to adjust the voltage value? At first, make the speed limiter
power on, then take off the case cover of the speed limiter, slide
the switch on the PCBA board to the "close" end, then we use the
multimeter to measure the voltage value of the brown wire and the
white wire. After adjusting the voltage, we need slide the switch
back to the "broke" end.
6.We can find two adjusting knobs on the PCBA board. We take a
screwdriver insert into the small knobs, screw it, then we can
adjust the voltage of this two wires.
6.1 After GPS SPEED LIMITER is installed completely, start the
vehicle first. When the
vehicle is idling, send a text message “STARTIDLE*123456”, the
device will automatically
learn the idle voltage, and then return the learned idle voltage
value to the mobile phone.
Then use the text message "SPEED*123456*xxx" to set the speed limit
value, first test it
with GPS speed, and the speed limit function is normal. If you can
find the original car
speed pulse line, you can make the car run at a constant speed of
30km/h, then press the
button twice to calibrate the current pulse coefficient.
4. LED indicator
4.1 The red light is the power indicator. If it is steady, it
indicates that the main power is on,
and the off indicates that the main power is off.4.2 Blue is the
GPS indicator, always on indicates GPS positioning, and off means
that
GPS is not positioned.
4.3 Green is the system indicator. If it is steady, it indicates
that the GSM network is not
registered. Flashing indicates that the GSM network has been
registered. Flashing twice
indicates that GPRS is connected.
5. Key operation:
5.1 Press and hold for more than 3 seconds, the buzzer will sound
and export data to the
U disk.
5.2 Press the button 3 times continuously, the buzzer will sound
and output data to the
printer.
5.3 Press the button twice continuously, the buzzer sounds 2 times,
and the current pulse
coefficient is automatically calibrated.
6. Bluetooth printer:
Printer power light--Blue light if it is steady light indicates
Bluetooth connection is normal,
if blue light is off, Bluetooth is not
Ethiopian Standard Speed limiter With Bluetooth Printer Speed
Governor ES6413:2019
7 Application Field:
- For large vehicle management and dispatching system ;
- Monitoring and management for engineering truck ;
- For dangerous goods transport vehicle management ;
- For tour bus and passenger car management ;
- For logistics vehicle monitoring and management ;
- For tank truck monitoring and management.
- For limit the speed of vehicles
